SG飞艇一天多少期

Depaneling is a critical step in SMT assembly. This is especially true when you have very small boards, custom-shaped printed circuit boards (e.g. circular), or the need for tight tolerances on the finished PCB assembly. A UV laser can be the perfect solution in this scenario.

FEATURED VIDEO
Laser Depaneling for Small, Precise Printed Circuit Boards

Depaneling is a critical step in SMT assembly. This is especially true when you have very small boards, custom-shaped printed circuit boards (e.g. circular), or the need for tight tolerances on the finished PCB assembly.

A UV laser can be the perfect solution in this scenario. While the initial equipment investment is high, the results are superior to other depaneling processes.

The UV laser lets us hold very tight tolerances on the finished assembly size, which is a big advantage when the exact board size is critical to the finished product. This is becoming more common as boards need to fit into smaller and smaller products.

Laser depaneling also allows components to be placed much closer to the edge of the board. The laser can cut very close to components without subjecting them to mechanical stress that may cause damage. Since you don’t have to keep components so far away from the edge of the board, you can maximize the use of board space in very small PCB assemblies.

The UV laser also allows us to cut PCBs in virtually any shape, with better precision than you can get with pre-routed boards.

This video illustrates the considerations in PCB depaneling and compares traditional methods to the UV laser. (Laser depaneling starts at 2:00).

Video Transcript

Printed circuit boards are typically fabricated in arrays, or panels. Then, after they go through the assembly process, the individual boards are separated or depaneled.

For the PCB designer, this means that once you complete the board layout, you need to create an array drawing. Fitting as many boards as possible into a standard panel will help minimize material costs. But of course, you also need to think about the manufacturing costs. If your contract manufacturer has an in-house design engineering department, you should definitely ask for their help with this.

At Z-AXIS, our design engineers are happy to create the array drawing for you whether you’ve done your own design and layout or used our services for it. They will work with our manufacturing engineers to determine the best depaneling process  for your design, and create the array drawing accordingly.

Depaneling methods for SMT boards

So let’s look at some of the different depaneling tools and methods we use at Z-AXIS.

For rectangular boards, the PCB panels typically have a v-score where the boards will be separated after assembly. But you can’t just snap it along the score,  because stresses in the board as you bend it can  damage SMT components. We use specialized tools to separate the boards with less  bending  stress.

One is a guillotine, which we use for thin boards. Another depaneling machine, often called a “pizza cutter,”  is used for thicker boards.

Curves and other shapes will come pre-routed, with tabs or drilled perforations. These boards can be depaneled using a punch, which is tooled to fit the board design. A hook tool is used for separating at tabs. It leaves “mouse bites” that may need to be sanded off.

Some manufacturers use a mechanical router, which creates less strain but more vibration stress and a lot of dust.

All of these methods do cause some mechanical stress on the board, and require that parts be kept a safe distance away from the edge to avoid damage. Ceramic capacitors are particularly susceptible to cracking, as are end caps on resistors.

UV laser depaneling

A newer method for depaneling eliminates this issue altogether. A UV laser cuts PCBs with  zero mechanical stress and makes extremely narrow, very precise cuts in any shape.

Laser cutting lets us hold very tight tolerances on the finished assembly size;   much tighter than you can get with pre-routed panels. This is a big advantage when the exact board size is critical to the finished product, which we are seeing more often as boards go into smaller and smaller products.

Laser cutting also allows components to be placed much closer to the edge of the board, helping you maximize the use of board space in very small PCB assemblies.

By understanding the different depaneling methods available, you can work with your contract manufacturer to create an array drawing for the depaneling method that will give you high reliability, low material cost, and the right balance of throughput , manufacturing cost, and precision.

Learn more

Contact Z-AXIS to learn more about our electronic design services and SMT assembly processes that can help you get the small, precision-built electronic assemblies you need for your product.

SG飞艇正规官方平台

From contract manufacturing to business news, get the insights you need to advance your business.
极速飞艇冷热号统计 澳洲10在线开奖 极速赛车开奖官网 澳洲幸运5全天两期计划 极速飞艇开奖网址 澳洲幸运10官网开奖 秒速赛车开奖官方同步 快乐飞艇预测软件下载